This shows you the differences between two versions of the page.
|
kaatskit:consoles [2018/09/20 00:11] aldavis [Consoles, and console modules] |
kaatskit:consoles [2020/04/13 22:48] (current) aldavis [Manuals] |
||
|---|---|---|---|
| Line 26: | Line 26: | ||
| * A simple "basic" module, for simpler applications and lower cost. It really has 3 buses. There are no bus assign switches, keeping it simple. You assign the buses with jumper plugs on the back, so it is sort of a permanent configuration. It's the same as the 3-bus module except that some parts, mostly switches, are left out to reduce the cost and complexity. | * A simple "basic" module, for simpler applications and lower cost. It really has 3 buses. There are no bus assign switches, keeping it simple. You assign the buses with jumper plugs on the back, so it is sort of a permanent configuration. It's the same as the 3-bus module except that some parts, mostly switches, are left out to reduce the cost and complexity. | ||
| - | * An even simpler "unbalanced" version. This is the same as the "basic", except that there is no input buffer and no gain trim. The gain is fixed at near maximum, which is appropriate for most consumer devices. It also uses the less expensive "thin" style faders. | + | * An even simpler "unbalanced" version. This is the same as the "basic", except that there is no input buffer and no gain trim. The gain is fixed, for "-10 dBv" for most consumer devices. It also uses the less expensive "thin" style faders. It keeps the cost down. |
| All modules are the same size, and are interchangeable. As you would expect on any real broadcast board, all have "cue", "talkback", and remote starts. Connections are RJ-45 jacks, fully "Studiohub+" compatible, including power. | All modules are the same size, and are interchangeable. As you would expect on any real broadcast board, all have "cue", "talkback", and remote starts. Connections are RJ-45 jacks, fully "Studiohub+" compatible, including power. | ||
| Line 109: | Line 109: | ||
| * {{:kaatskit:input-final.pdf|Final assembly and configuration}} | * {{:kaatskit:input-final.pdf|Final assembly and configuration}} | ||
| * Monitor module | * Monitor module | ||
| + | * {{:kaatskit:monitor-in.assy.pdf|Main board}} | ||
| * Output module | * Output module | ||
| + | * {{:kaatskit:outboard.assy.pdf|Output board}} | ||
| * Chassis | * Chassis | ||
| * {{:kaatskit:bus-and-power.pdf|Bus board and power in board}} | * {{:kaatskit:bus-and-power.pdf|Bus board and power in board}} | ||